Comment 11 for bug 363522

It looks like foo2zjs may be trying to download firmware during the print...
try uninstalling it.

On Sun, May 3, 2009 at 10:35 AM, wojosockie <email address hidden>wrote:

> I don't know if this helps, but I have had the same problem as described
> in many other bugs similar to this person. I have a recently updated
> Ubuntu 9.04 install with a HP LaserJet P1006 printer (USB). I cannot
> get this to work. It says that it is installed automatically, and
> sometimes prints a test page, but doesn't work or says communications
> don't work when attempting to print a page.
>
> I went to: https://wiki.ubuntu.com/DebuggingPrintingProblems
>
> this is the output of doing what that page asks.
>
> michael@Munin:~$ lsb | grep usb
> bash: lsb: command not found
> michael@Munin:~$ lsmod | grep usb
> usblp 20224 0
> usbhid 42336 0
> usb_storage 82880 0
> michael@Munin:~$ tail -f /var/log/messages
> May 3 12:13:48 Munin kernel: [ 31.956835] Bridge firewalling registered
> May 3 12:13:52 Munin kernel: [ 35.589709] agpgart-intel 0000:00:00.0:
> AGP 3.0 bridge
> May 3 12:13:52 Munin kernel: [ 35.589728] agpgart-intel 0000:00:00.0:
> putting AGP V3 device into 8x mode
> May 3 12:13:52 Munin kernel: [ 35.589771] nvidia 0000:01:00.0: putting
> AGP V3 device into 8x mode
> May 3 12:13:53 Munin kernel: [ 36.759013] ADDRCONF(NETDEV_UP): eth0:
> link is not ready
> May 3 12:13:53 Munin kernel: [ 36.878117] e1000: eth0: e1000_watchdog:
> NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
> May 3 12:13:53 Munin kernel: [ 36.878320] ADDRCONF(NETDEV_CHANGE): eth0:
> link becomes ready
> May 3 12:15:09 Munin pulseaudio[3610]: alsa-util.c: Cannot find fallback
> mixer control "PCM" or mixer control is no combination of switch/volume.
> May 3 12:15:09 Munin pulseaudio[3610]: alsa-util.c: Cannot find fallback
> mixer control "Mic" or mixer control is no combination of switch/volume.
> May 3 12:26:49 Munin kernel: [ 813.481483] usb 1-1: USB disconnect,
> address 2
> May 3 12:27:56 Munin kernel: [ 880.356051] usb 1-1: new high speed USB
> device using ehci_hcd and address 7
> May 3 12:27:56 Munin logger: loading hp_laserjet_p1006 firmware 001 007
> May 3 12:27:56 Munin kernel: [ 880.508206] usb 1-1: configuration #1
> chosen from 1 choice
> May 3 12:27:56 Munin kernel: [ 880.510983] usblp0: USB Bidirectional
> printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
> May 3 12:27:57 Munin /etc/hotplug/usb/hpljP1006: foo2zjs: loading HP
> LaserJet P1006 firmware /usr/share/foo2xqx/firmware/sihpP1006.dl to
> /dev/usb/lp0 ...
> May 3 12:28:00 Munin kernel: [ 883.974930] usblp0: nonzero write bulk
> status received: -108
> May 3 12:28:00 Munin kernel: [ 883.975321] usblp0: removed
> May 3 12:28:00 Munin /etc/hotplug/usb/hpljP1006: foo2zjs: ... download
> failed.
> ^C
> michael@Munin:~$ lpinfo -v
> network socket
> network beh
> direct hal
> direct hpfax
> direct hp:/usb/HP_LaserJet_P1006?serial=AC1TR9V
> network http
> network ipp
> network lpd
> direct parallel:/dev/lp0
> direct scsi
> serial serial:/dev/ttyS0?baud=115200
> network smb
> michael@Munin:~$
>
> How do I get this working? or what do I do from here?
>
> Thank you for your help.
>
> --
> HP LaserJet P1005 unusable in 8.04 and 9.04
> https://bugs.launchpad.net/bugs/363522
> You received this bug notification because you are a member of HP Linux
> Imaging and Printing, which is subscribed to HPLIP.
>