Ubuntu
nut package

nut 2.7.2-4ubuntu1 source package in Ubuntu

Changelog

nut (2.7.2-4ubuntu1) xenial; urgency=low

  * Merge with Debian; remaining changes (LP: #1522346) :
    - debian/control:
      + remove Build-Depends on libpowerman0-dev
      + remove nut-powerman-pdu
    - debian/nut-powerman-pdu.{install,manpages}: dropped for now
    - debian/{nut-cgi,nut-server}.postinst: add nut to the group
      unconditonally, for compatibility with UPSes connected by serial port.
    - debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
      debian/rules: Install apport hooks for all top-level nut packages.
    - Patch libtool.m4 and configure to support ppc64le.
    - Disable systemd unit; it does not check nut.conf whether nut is
      configured, and thus fails to start (and the package install).  The
      init.d script works well enough for the time being.
    - debian/tests/test-nut.py: in the CVE_2012_2944 test, give nut at most
      + 5 seconds to shut down, instead of expecting it to be shut down
        immediately after sending the killall.
      + Additional indication on how to run tests for oneiric, precise to
        vivid and wily+
    - debian/patches/0006-ups-conf-reorder.patch: Move maxretry setting
      above Examples section.
    - debian/tests/control : Fix dep8 test failures:
       + Drop python-unit from dep8 dependencies since the python-test
         package has now been removed. The unittest module has shipped with
         Python since 2.1.
       + Add dep8 test dependency on python, since Python 2 is required and
         is not necessarily installed by default any more.

   * Dropped changes:
     - Fix linking libupsclient : Superseded upstream
     - debian/patches/backport-fix-lp753661.patch: extraneous end-of-line now
       fixed differently upstream.
     - debian/rules: Use udev version for Ubuntu; delta no longer needed as
       both versions are earlier than the earliest supported udev in Ubuntu.

  [ Steve Langasek ]
  * debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
    unconditional, since adduser is guaranteed to be idempotent.

 -- Louis Bouchard <email address hidden>  Thu, 03 Dec 2015 12:37:13 +0100

Upload details

Uploaded by:
Louis Bouchard
Uploaded to:
Xenial
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
admin
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Xenial release main admin

Downloads

File Size SHA-256 Checksum
nut_2.7.2.orig.tar.gz 2.1 MiB 4d5365359b059d96dfcb77458f361a114d26c84f1297ffcd0c6c166f7200376d
nut_2.7.2-4ubuntu1.debian.tar.xz 57.4 KiB 2b4191ee118e7fab4e19bb8563586ef5e340a58ad1d6439d50a8305248e9b1fe
nut_2.7.2-4ubuntu1.dsc 3.0 KiB 531197f898bb8273de705ead0d74bd44a430ce6ad4393d87f1aebbf530e2de14

Available diffs

View changes file

Binary packages built by this source

libups-nut-perl: network UPS tools - Perl bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Perl bindings to connect to NUT server.

libupsclient-dev: network UPS tools - development files

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides the development files.

libupsclient4: No summary available for libupsclient4 in ubuntu zesty.

No description available for libupsclient4 in ubuntu zesty.

libupsclient4-dbgsym: No summary available for libupsclient4-dbgsym in ubuntu yakkety.

No description available for libupsclient4-dbgsym in ubuntu yakkety.

nut: network UPS tools - metapackage

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package is a metapackage that installs both nut-server and nut-client,
 in most cases it is sufficient for a basic UPS monitoring system.

nut-cgi: network UPS tools - web interface

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides an HTTP interface for Network UPS Tools which makes
 it possible to monitor the core NUT system with a web browser.

nut-cgi-dbgsym: debug symbols for package nut-cgi

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides an HTTP interface for Network UPS Tools which makes
 it possible to monitor the core NUT system with a web browser.

nut-client: No summary available for nut-client in ubuntu zesty.

No description available for nut-client in ubuntu zesty.

nut-client-dbgsym: debug symbols for package nut-client

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides NUT's clients that allows the user to control
 and monitor the UPS.

nut-doc: No summary available for nut-doc in ubuntu zesty.

No description available for nut-doc in ubuntu zesty.

nut-ipmi: No summary available for nut-ipmi in ubuntu yakkety.

No description available for nut-ipmi in ubuntu yakkety.

nut-ipmi-dbgsym: debug symbols for package nut-ipmi

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package currently provides nut-ipmipsu, a driver which allows
 to monitor IPMI power supply units (PSU) found in servers of
 popular brands, such as Dell, HP, IBM. It adds an IPMI interface
 to the core NUT system.

nut-monitor: No summary available for nut-monitor in ubuntu yakkety.

No description available for nut-monitor in ubuntu yakkety.

nut-server: No summary available for nut-server in ubuntu yakkety.

No description available for nut-server in ubuntu yakkety.

nut-server-dbgsym: No summary available for nut-server-dbgsym in ubuntu zesty.

No description available for nut-server-dbgsym in ubuntu zesty.

nut-snmp: No summary available for nut-snmp in ubuntu zesty.

No description available for nut-snmp in ubuntu zesty.

nut-snmp-dbgsym: debug symbols for package nut-snmp

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides snmp-ups, the SNMP multi-MIB driver for UPS, which
 supports various MIBs including IETF, MGE, and APC. It adds an SNMP
 Manager interface to the core NUT system.

nut-xml: No summary available for nut-xml in ubuntu yakkety.

No description available for nut-xml in ubuntu yakkety.

nut-xml-dbgsym: No summary available for nut-xml-dbgsym in ubuntu zesty.

No description available for nut-xml-dbgsym in ubuntu zesty.

python-nut: network UPS tools - Python bindings for NUT server

 Network UPS Tools (NUT) is a client/server monitoring system that
 allows computers to share uninterruptible power supply (UPS) and
 power distribution unit (PDU) hardware. Clients access the hardware
 through the server, and are notified whenever the power status
 changes.
 .
 This package provides Python bindings to connect to NUT server.