Comment 15 for bug 415358

Hi Martin,

Using linux-image-2.6.28-15-generic from jaunty-proposed repository wired net connection works properly.

01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
 Subsystem: ASUSTeK Computer Inc. Device 838a
 Flags: bus master, fast devsel, latency 0, IRQ 2299
 Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
 I/O ports at ec00 [size=128]
 Capabilities: [40] Power Management version 3
 Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
 Capabilities: [58] Express Endpoint, MSI 00
 Capabilities: [6c] Vital Product Data <?>
 Capabilities: [100] Advanced Error Reporting <?>
 Capabilities: [180] Device Serial Number ff-8c-24-00-23-c4-a7-ff
 Kernel driver in use: atl1c
 Kernel modules: atl1c

root@eeepc-1005HA:~# cat /proc/version_signature
Ubuntu 2.6.28-15.51-generic

root@eeepc-1005HA:~# dmesg | grep eth0
[ 21.839861] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 32.124062] eth0: no IPv6 routers present

root@eeepc-1005HA:~# ethtool eth0
Settings for eth0:
 Supported ports: [ TP ]
 Supported link modes: 10baseT/Half 10baseT/Full
                         100baseT/Half 100baseT/Full
 Supports auto-negotiation: Yes
 Advertised link modes: Not reported
 Advertised auto-negotiation: Yes
 Speed: 100Mb/s
 Duplex: Full
 Port: Twisted Pair
 PHYAD: 0
 Transceiver: internal
 Auto-negotiation: on
 Supports Wake-on: pg
 Wake-on: d
 Current message level: 0x0000003f (63)
 Link detected: yes